WAGNER GM 4600AC, Руководство по эксплуатации

Страница: 12 / 44

12
GM 4600AC
OPERATING MANUAL
EDITION 02/2008 Part No. DOC394861
4.1
FIELDS OF APPLICATION, USING IN ACCORDANCE WITH THE INSTRUCTIONS
The gun is suitable for atomising liquid materials, particularly coating materials, using the
AirCoat process.
4.1.1
PROCESSIBLE MATERIALS
Top-coat paints, primer paints, corrosion protection solvents, textured paints, lyes, staining
solvents, clear paints, parting solvents, etc. on a solvent or water basis.
Note : In the event of application problems consult your Wagner branch and/ or the
paint manufacturer.
4
DESCRIPTION
SIHI_0019_GB
WARNING
Hot coating substances!
Burns
œ Wear antistatic protective gloves.
œ When operating the unit with a coating material with a temper-
ature greater than 43°C; 109.4°F: Identify the unit with a warning
sticker "Warning - hot surface".
4.2.2
VARIANT FOR APPLICATION RANGE UP TO 25 MPA, 250 BAR, 3625 PSI
Qty Part No. Description
1 0394014 GM 4600AC 25 MPa ; NPSM1/4“ Paint connection
4.2.1
VARIANT FOR APPLICATION RANGE UP TO 16 MPA; 160 BAR; 2320 PSI
Qty Part No. Description
1 0394004 GM 4600AC 16 MPa; NPSM1/4“ Paint connection
4.2
SCOPE OF DELIVERY
These AirCoat gun is available in two different variants. The nozzle size depends on the
paint and on the application. Therefore the air cap and the nozzle are not included in the
scope of supply. For a gun accessories look in chapter 9.
0394004 0394014 AirCoat hand gun GM 4600AC
Qty Qty Part No. Description
1 1 0394891 CE-conformity
1 1 394860 Operating manual German
1 1 see chap. 1 Operating manual for the other language
For special versions the delivery note applies.
4.2.3
STANDARD EQUIPMENTS
The standard equipment includes: