WAGNER GM 4100AC, Руководство по эксплуатации

Страница: 9 / 44

9
GM 4100AC
OPERATING MANUAL
EDITION 12/2008 PART NO. DOC394821
2.4.1
CORRECT USE
2.4.2
EXPLOSION PROTECTION IDENTIFICATION
2.4.3
MAXIMUM SURFACE TEMPERATURE
2.4.4
MAXIMUM SURFACE TEMPERATURE
2.4
USE IN HAZARDOUS LOCATIONS
4HEUNITISSUITABLEFORWORKINGLIQUIDMATERIALSINACCORDANCEWITHTHECLASSIlCATIONINTO
EXPLOSIONCLASSES
As defined in the Directive 94/9/CE (ATEX 95), the unit is suitable for use in areas where
there is an explosion hazard.
II 2G X
CE: Communautés Européennes
Ex: Symbol for explosion protection
II: Unit class II
2: Category 2 (Zone 1)
G: Ex-atmosphere gas
X: See: "Special Notes" in the operating manual
3AFEHANDLINGOF7!'.%2SPRAYUNITS
-ECHANICALSPARKSCANFORMIFTHEUNITCOMESINTOCONTACTWITHMETAL
)NANEXPLOSIVEATMOSPHERE
œ $ONOTKNOCKORPUSHTHEUNITAGAINSTSTEELORRUSTYIRON
œ $ONOTDROPTHESPRAYGUN
œ 5SEONLYTOOLSTHATAREMADEOFAPERMITTEDMATERIAL
)GNITIONTEMPERATUREOFTHECOATINGMATERIAL
œ %NSURETHATTHEIGNITIONTEMPERATUREOFTHECOATINGMATERIALISABOVETHEMAXIMUM
SURFACETEMPERATURE
-EDIUMSUPPORTINGATOMIZING
œ 4OATOMIZETHEMATERIALUSEONLYWEAKLYOXIDIZINGGASESEGAIR
#LEANING
)FTHEREAREDEPOSITSONTHESURFACESTHEUNITMAYFORMELECTROSTATICCHARGES&LAMESOR
SPARKSCANFORMIFTHEREISADISCHARGE
œ 2EMOVEDEPOSITSFROMTHESURFACESTOMAINTAINCONDUCTIVITY
X: The maximum surface temperature corresponds to the permissible material tempera-
ture. This and the permissible ambient temperature can be found in the Technical Data.
2.5
GERMAN REGULATIONS AND GUIDELINES
see chapter 3.3