WAGNER FLEXiO 4000, Руководство пользователя

Страница: 5 / 20

eN
5
CoNTRolS AND fUNCTioNS
+
-
x-BooST™ PoweR DiAl
the X-boost power dial adjusts the level of air power
produced by the turbine.
iSPRAY
DeTAil fiNiSh
MATeRiAl flow CoNTRol
the material flow control determines the amount of
spray material that is sprayed from the spray nozzle.
iSpray nozzle - the material flow can be adjusted
incrementally from 1 (minimum) to 12 (maximum) by
turning the adjustable material flow control.
Detail Finish nozzle - Set the material flow by turning
the red knob on the trigger of the spray gun.
TRiGGeR
pulling the trigger will deliver spray material from the
material container to the nozzle assembly, where it is
sprayed.
wiDe
NARRow
SPRAY wiDTh leveR
the spray width lever determines the width of the spray
pattern.
=
=
AiR CAP
Adjust the spray pattern by turning the air cap ears. the
air cap position will determine the movement direction
of the spray gun.
=
=
horizontal pattern (use ‘up and down’ spraying motion)
=
=
Vertical pattern (use ‘side to side’ spraying motion)