Quick Start Guide
Taking Readings (Measurements)
Note: An SD memory card MUST be installed in order for the
DataMaster™ to take a reading with the Bluetooth® Reader. If
using a lockable SD card, the card must be unlocked to receive
the reading.
1
Add a Job – From the “Tools” menu, select “Add Job.”
Job names must be a maximum of 8 alpha-numeric
characters. Once job name is entered, select “OK” to
add to job list. Multiple job names can be added at any
time. The job list can be reviewed at any time by select-
ing “View” from the main menu.
2
Begin Taking Readings – Go to an already installed
Smart Sensor. Firmly insert the Bluetooth® Reader into
the Smart Sensor, holding it in place for approximately 3
seconds, then remove. After no more than 5 seconds,
the READING ACQUIRED display should appear on the
DataMaster™, if not, reinsert the Reader. The screen
will dismiss itself after approximately 3 seconds. If this
is the very first reading for this sensor, you will be taken
to the “Select a Job” screen where you will assign this
sensor to the appropriate job from the job list. The first
reading at a new site may take 3 to 7 seconds to initiaite
the first connection. Once connected (indicated by the
BlueTooth icon in the title bar) all subsequent readings
should take only 1 to 2 seconds. Readings from that
sensor will be recorded in the assigned job file. Sensors
are non-transferrable between jobs, once assigned.
3
Enter Sensor Information - When the DataMaster™ ac-
quires each initial sensor reading, touch the “Informa-
tion” button (“i” in a circle) on the bottom right corner
of the screen. On the “Sensor Info” screen, enter the
sensor location (Loc:) and the Hole Depth, which are
mandatory for correct reporting according to the ASTM
F2170 reporting protocol. Floor, Slab and Slab thickness
are optional, but may be used to provide additional in-
formation if desired. Once a sensor has been assigned
to a specific Job, subsequent readings from that sen
-
sor will automatically be stored under that Job. Job site
data can be viewed on the “Graph” menu of the Data-
Master™, or by selecting individual sensors from the job
listing. Each reading will record the current slab internal
RH and Temperature, sensor serial number, sample (i.e.
2 of 3), date, time, dew point (DP) and ambient RH and
temperature.
Содержание Datamaster
Страница 1: ......
