WAGNER C575, Инструкция по эксплуатации, Страница: 6 / 18

Readings must be evaluated relative to the purpose
for which they were taken. You must determine the
readings, which work best for the products you install
or apply. Always refer to the adhesive and/or floor
covering recommendations for the acceptable
moisture condition of the concrete.
This meter is designed for easy operation and to
provide a quick, initial indication of the moisture
condition. The meter does not measure the amount
of free water (the water that leaves during the curing
stage) in the concrete or the pounds of water per
square foot, etc. The information provided by meter
readings is affected by a number of variables so the
readings must be evaluated on the basis of
professional knowledge and the user’s skill and
judgment. After using the unit for a short period
of time, the user will be able to take a reading and
predict whether or not further testing is needed.
to accept the products being installed or applied.
If manufacturer requires further testing,
use the meter
to determine the best locations for placement of the
manufacturer’s suggested test. Further testing
methods such as relative humidity may also be used if
higher accuracy is desired, even if the manufacturer of
the material does not require it.
6
Interpreting the Reading: