manualshive.com logo in svg

WAGNER AirCoat GM 4100 AC, Руководство по эксплуатации

Поделиться
Скачать
WAGNER AirCoat GM 4100 AC Скачать руководство пользователя страница 25

25

VERSION 01/2018

ORDER NUMBER DOC 394821

7.4 

CHANGING AIRCOAT NOZZLE

NOTICE

Defective AirCoat nozzle!

Insufficient paint application quality.

Do not use sharp-edged objects to treat carbide on the AirCoat nozzle.

1. Relieve the pressure on the spray gun and 

product pressure generator.

A

B

C

D

B_02263

B_02261

x

2. Secure the spray gun with the trigger locking 

device.

3. Unscrew union nut (A).
4. Remove air cap (B).
5. Press AirCoat nozzle (C) out of air cap (B) by 

hand and treat with cleaning agent until all 

remaining paint has been dissolved.

Assembly:

6. Fit nozzle (C) in nozzle seal (D).
7. Fit air cap (B) over nozzle (C).

Note the flattened parts (X) on the nozzle and 

in the air cap.

8. Fit the union nut with nozzle guard (A) and 

tighten by hand.

7.4.1  CLEANING AIRCOAT NOZZLE

For disassembly and assembly of AirCoat nozzles, see Chapter 

7.4

.

The AirCoat nozzle (C) can be placed into a cleaning solution which has been 

recommended by the paint manufacturer.

Содержание AirCoat GM 4100 AC





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды