VM 500
VERSION 09/2018
ORDER NUMBER DOC 2318724
18
5.8
OPERATING ELEMENTS AND CONNECTIONS
5.8.1 OPERATING ELEMENTS ON FRONT SIDE
Designation
VM 500
B_03418
3
4
1
2
1 Illuminated display "High voltage"
2 Illuminated display "Operating signal"
3 Push button "Standby mode"
4 Illuminated display "Standby"
5.8.2 CONNECTIONS ON THE REAR SIDE
Spannung:
Voltage:
Strom:
Current:
max. 20Vpp
max. 1,0A
Typ / Type:
VM 500
115VAC - 230VAC
50Hz / 60Hz
2309228
max. 40W
Wagner International AG
Industriestrasse 22
CH - 9450 Altstätten
Made in Switzerland
Serie Nr.:
Serial No.:
Spannung:
Voltage:
Artikel Nr.:
Article No.:
Eingangsleistung:
Input Power:
Schutzart:
IP Code:
Norm:
Standard:
EN 50050-1:2013
IP 54
Eingangsstrom:
Input Current:
max. 0.5A
I
0
Main Switch
Prim.
1.0 AT
Nicht unter Spannung trennen!
Do not disconnect under voltage!
Zulässige Gerätekombinationen siehe Benutzerinformation.
Admissible combinations of devices, see information for use.
0102
II 3(2) G
SIRA 11 ATEX 5374X
B_07274
5
6
7
8
9
10
Designation
5 Mains input terminal: connection for mains cable with safety clip.
Warning - Do not disconnect under voltage.
6 Primary fuse: 1.0 ampere, slow-acting
7 Mains supply switch:
0 = The control unit is deactivated.
I = The control unit is activated.
8 Spray gun connection: for connecting a GM 5000EA or GM 5000EAC spray gun.
Warning - Do not disconnect under voltage.
9 Service connection cover: only for WAGNER service personnel.
10 Knurled nut grounding: grounding cable connection to the signal ground.
