EN-XXX_EURO-C22-L22-In-Roof-Pantile_MA-121217-1WA10142
11
Figure 28 Fix upper flashing sheets on the batten using 2 fixing clips.
Figure 29 Position the roof-tile supporting bar by vertically shifting it,
so that later the tile row will be aligned with the tiles on the sides. Then
affix with metal strips to roof battens.
Figure 30 Affix black foam rubber tape along the fold to the upper
flashing sheet.
Figure 31 Secure every flashing sheet with 2 additional sheet metal
screws each.
Figure 32 Affix foam rubber tape along the folds of the side panels
as well.
Figure 33 Roof tiles above the collectors may have to be cut to size.
Drill holes into the pieces that have to be attached, and screw to bat-
tens.
