SNAP ACCELERATION TEST
1.
FROM THE MAIN MENU, PRESS THE
M KEY
TO ENTER THE SNAP
ACCELERATION TEST.
2.
USING THE KEYPAD, ENTER THE VEHICLE INFORMATION. USE THE
ARROW
BUTTONS
TO SCROLL EDIT DATA.
3.
START ENGINE.
4.
PRESS THE
ENTER KEY
TO BEGIN TEST.
5.
ENSURE THE SENSOR HEAD IS NOT IN THE STACK AND PRESS THE
ENTER
KEY
.
6.
AFTER CALIBRATION IS COMPLETE, ATTACH SENSOR HEAD TO STACK WITH
MAGNETIC BAND CLAMP. PRESS
ENTER
TO START THE TEST.
7.
DEPENDING ON WHETHER YOU HAVE THE 3 PRELIMINARY SNAPS ENABLED,
YOU WILL BE PROMPTED TO RUN THOUGH A SERIES OF 3 OR 6 SNAP TESTS.
FOLLOW THE INSTRUCTIONS IN GREEN.
8.
THE SPREAD OF THE PRE-SNAP TEST MUST BE WITHIN 5% IN ORDER TO
CONTINUE TO PERFORM THE ACTUAL OPACITY TEST.
9.
AT THE END OF THE SERIES OF SNAP TESTS, TURN THE ENGINE OFF AND
REMOVE THE SENSOR HEAD FROM THE STACK
10.
PRESS THE
ENTER KEY
TO PERFORM THE ZERO DRIFT TEST
11.
AFTER THE ZERO TESTS IS PERFORMED, IT WILL AUTOMATICALLY STORE
THE TEST RESULTS. YOU CAN PRINT RESULTS TO THE WIRELESS PRINTER.
10
