Wagan Solar e Charger Exec-Duo, Руководство пользователя

Страница: 3 / 5

www.wagan.com
3
Solar e Charger
™
Exec Duo by Wagan Tech
©2010 Wagan Corporation
All Rights Reserved
Wagan and wagan.com are trademarks used by Wagan Corporation
4
User’s Manual—Read before using this equipment
Warning
•
Do not operate the solar charger in humid or acidic conditions.
Do not operate or store in temperatures above 70°C.
•
Use caution when inserting and removing iPhone to avoid any
damage to the charging jack.
• Keep out of the reach of children.
•
Please operate under the guidelines of this instruction manual to
prevent any risk or damage to the iPhone and/or Solar e Charger.
• Wagan Corporation is not liable for any incidental, indirect, or
consequential injuries, damages, losses, expenses or costs arising
from any violation of the above mentioned prohibitive clauses.
Specifications
• Lithium-Ion polymer battery capacity: 3.7V 2,000mAh
• Output Voltage: 5V (Max)
• Output Current: 500mA
• Charge Voltage:
Solar to battery: 5.5V DC
USB to battery: 5V DC
• Charge current:
Solar: 180mA
USB/DC: 500mA
• Charging time: within 4 hours (USB/DC)
• Peak power supplied by photocell: 0.99W
• Size: 150 x 70 x 25 mm
• Weight: 130g
2.
To charge internal Lithium polymer battery of the solar charger, turn
the power switch to “OFF” and the internal battery of the solar
charger will automatically charge instead of charging your iPhone.
Under direct sunlight, the Lithium polymer battery will be fully
charged in 12 hours. Solar charging intensity will be shown by the
battery status lights: 25%, 50%, 75%, and 100%. The blue LEDs will
light up automatically when placed under the sun.
Note: You do NOT need to press and hold the “Power Display” button
to see the charge intensity. Only press and hold the “Power Display”
button to check the battery status of the internal Lithium polymer battery.
Charging Solar e Charger via Mini USB Charger (not included):
1. Connect the corresponding end of a standard USB charging cable to
the USB charging port on the solar charger.
2.
Connect the other end of the USB charging cable to a computer or
laptop to begin charging.
Notes:
•
Please turn off the power switch of the solar charger when not in use.
This will preserve the internal battery.
•
When not in use, we recommend leaving the solar charger under
sunlight to allow it to charge itself.
•
If the iPhone is inserted properly and the power switch is turned
on, but there is no indication of charging displayed on the iPhone’s
screen, please make sure that:
1.
The red Power Display LED is lit up.
2.
The iPhone is securely and fully attached to the charging plug.
3. None of the LED lights are dimly lit. If any of the LEDs are dimly lit
or not lit up at all, please recharge the solar charger.