Wagan Elite 400W Pure Sine, Руководство пользователя

Страница: 10 / 16

www.wagan.com
10
Elite 400W Pure Sine Inverter by Wagan Tech
©2010 Wagan Corporation
All Rights Reserved
Wagan and wagan.com are trademarks used by Wagan Corporation
Troubleshooting
PROBLEM: Low or No Output Voltage – Fault LED Lit
Reason Solution
Poor contact with battery, inverter
terminals or DC socket.
Clean terminals thoroughly. Reinstall
and tighten. Clean DC socket with non-
metallic abrasive emery stick.
PROBLEM: No Output Voltage – No LEDs Lit
Reason Solution
Fuse blown Check vehicle’s Accessory Socket Fuse
and if blown, replace with the same
type and rating fuse.
PROBLEM: Inverter is Shut Down – Fault LED Lit
Reason Solution
Battery voltage below 10 volts Charge or replace battery.
Inverter is too hot (thermal shut down
mode).
• Allow inverter to cool.
• Check for adequate ventilation.
• Reduce the load on the inverter to
rated continuous power output.