Wagan Elite 2000W, Руководство пользователя

Страница: 11 / 20

12V Battery Bank
©2016 Wagan Corporation. All Rights Reserved.
Wagan Tech and
wagan.com
are trademarks used by Wagan Corporation.
User’s Manual—Read before using this equipment
10
Battery Bank Diagram
The diagram below shows inverter connections to a battery bank with
recommended fuse protection.
Fuse
WARNING—Exploding Batteries!!
e
xploding baTTeries can spray molTen lead
,
hoT sulfuric acid
,
and
oTher meTal and plasTic fragmenTs
. b
aTTeries ThaT are charging or
under high discharge raTes produce explosive hydrogen gas inTo The
surrounding area
. b
e safe
–
fuse The baTTery bank and make sure The
baTTeries are properly venTilaTed
.
DC Cable Gauge
Minimize cable losses by using the thickest wire available and the shortest
practical length.
Measure Round Trip (RT) cable distances in feet. Round Trip cable distance is
battery to inverter and back to battery.
Use a recommended ANL fuse and Fuse holder. Fuse at 300 Amps. ANL are
quick acting and sealed so they do not spark when they blow. Place fuse no
more than one foot from the Positive (+) terminal of the battery.
RT Length 4-6 Ft 7-8 Ft 9-10 Ft 11-14 Ft
AWG 2 0 0 0
If the inverter and the battery are positioned within 4 feet of each other,
a minimum of 4 AWG insulated copper wire should be used to make the
connections. If the distance is longer than 32 inches (2.6 ft), heavier wire will
be required.