©2013 Wagan Corporation. All Rights Reserved.
Wagan Tech and
wagan.com
are trademarks used by Wagan Corporation.
User’s Manual—Read before using this equipment
8
www.wagan.com
PROBLEM: No Output Voltage – No LEDs Lit
Reason
Solution
Blown fuse.
Check fuse. If the fuse is blown,
replace with the same type and
rating fuse.
PROBLEM: Inverter Auto Shut Down – Fault LED Lit
Reason
Solution
Battery voltage is below 9.5 volts.
Charge or replace battery.
Inverter is too hot (thermal shut down
mode).
Allow inverter to cool.
Check for adequate ventilation.
Reduce the load on the inverter to
the specified TrueRated
™
power max
output.
PROBLEM: Inverter Shut Down – Fault LED Lit
Reason
Solution
Equipment being operated draws too
much power.
Do not use the equipment with
this inverter; use a higher wattage
inverter.
