WEL-7103 Duo Electronic Lock User Manual
Set the door as Toggle Mode
1. Press * 4 #
2. Enter current Master Code, then press #
1. Master correct: beep 1 time, flash 1 time green LED.
2. Master incorrect: beep 2 times, flash 2 times red LED, then standby.
Note:
•
Toggle Mode: the lock will switch between “always open” and “always close”
when legal user code is entered to the lock, or legal user card is inducted to the
reader.
Set the door as Standard Mode
1. Press * 5 #
2. Enter current Master Code, then press #
1. Master correct: beep 1 time, flash 1 time green LED.
2. Master incorrect: beep 2 times, flash 2 times red LED, then standby.
Note:
•
After set the door as Standard Mode, if the lock was opened, it will reverse back
to lock on.
Set the door as Dual Mode
1. Press * 6 #
2. Enter current Master Code, then press #
3. Master correct: beep 1 time, flash 1 time green LED.
4. Master incorrect: beep 2 times, flash 2 times red LED, then standby.
Note:
•
Dual Mode will require user to flash a valid user card then enter a valid user
code to access the lock.
•
Dual Mode can be used in high security place such as bank office doors.
Set the door as Single Mode
1. Press * 7 #
2. Enter current Master Code, then press #
5. Master correct: beep 1 time, flash 1 time green LED.
6. Master incorrect: beep 2 times, flash 2 times red LED, then standby.
2011. Nov 3
