WAFER GSM-KEY REMOTE CONTROL UNIT
http://www.waferstar.com
• To check which is the number in a place of the list:
#PWD123456#SHL0001?
Acknowledge
: SHL01 IS 61143815 OK
Or
#PWD123456#PHL0001? #PWD123456#QHL0001?
• To erase a number:
#PWD123456#WHL001=0000
Or
#PWD123456#PHL001=0000
#PWD123456#QHL01=0000
(or you can write over it another number you wish to add)
List All numbers in the List
#PWD123456#SHL=ALL?
(Instruction Only for
PC)
Acknowledge
:
SHL01 IS XXX
SHL03 IS XXX
QHL08 IS XXX
……
#GOT Gate pulse delay time
.
When setup the GOT Timer,first you need to setup the timer
multiplier at millisecond or second or
minutes.
#PWD123456#TIMER-DELAY-AT-MILLISECOND
#PWD123456#TIMER-DELAY-AT-SECOND
#PWD123456#TIMER-DELAY-AT-MINUTE
Then you need to setup the GOT timer number:
This command is useful in case you need to keep the button pressed longer. The standard time is
0,3 seconds (300 ms). You can change it with the GOT command.
• The syntax of the command is the following:
#PWD123456#GOT500
Acknowledge
:
DELAY TIME SET TO 0500MS
With the above command the opening time has been set to 500 ms (0,5 seconds).
• You can check what the current pulse time is with the command
#PWD123456#GOT?
Acknowledge
:
DELAY TIME IS 0500 MS
#ALARM Alarm setup
(1)You can setup the alarm phone number when have the alarm information input
#PWD123456#ALARM01=13818120592
Where 01 is the position in the list
Acknowledge
: ALARM01 SET TO 61143815 OK
When the number is seted to 000000,that means delete the number in this position
(2)
check which is the number in a place of the alarm phone list:
#PWD123456#ALARM01?
Acknowledge
: ALARM01 IS 61143815 OK
(3)
List all numbers in the alarm phone list:
