Waeco SinePower MSI212, Инструкция по установке и эксплуатации, Страница: 30 / 220

EN
Guarantee SinePower
30
11 Guarantee
The statutory warranty period applies. If the product is defective, please
contact the manufacturer's branch in your country (see the back of the
instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
12 Disposal
➤
Place the packaging material in the appropriate recycling waste bins
wherever possible.
M
If you wish to finally dispose of the product, ask your local recycling
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
No output voltage, green
and red LED light Excessive load Switch off the device.
Reduce the load.
Switch on the device.
Short circuit or electrical wiring
error Switch off the device.
Remove short circuit.
Check electrical wiring.
Switch on the device.
The inverter switches off
when the consumer is
switched on, red Status
LED lights Starting current too high Compare the device power
with the maximum power of
the inverter.
Fault Cause Remedy