Waeco SinePower MSI1312, Инструкция по установке и эксплуатации

Страница: 37 / 436

EN
SinePower Explanation of symbols
37
1 Explanation of symbols
!
A
I
➤
Action: This symbol indicates that action is required on your part. The
required action is described step-by-step.
✓
This symbol describes the result of an action.
Fig. 1 5, page 3: This refers to an element in an illustration. In this case,
item 5 in figure 1 on page 3.
2 General safety instructions
2.1 General safety
The manufacturer accepts no liability for damage in the following cases:
 Faulty assembly or connection
 Damage to the product resulting from mechanical influences and excess
voltage
 Alterations to the product without express permission from the manu-
facturer
 Use for purposes other than those described in the operating manual
!
WARNING!
 Only use the device as intended.
 Do not operate the device in a damp or wet environment.
 Do not operate the device near any flammable materials.
WARNING!
Safety instruction:
Failure to observe this instruction can cause
fatal or serious injury.
NOTICE!
Failure to observe this instruction can cause material damage and
impair the function of the product.
NOTE
Supplementary information for operating the product.