Instructions CoolPower
36
6
8. Troubleshooting
a) Battery charge OK, no power to fridge
i) Check all connections – ensure they are secure and clean
ii) Check fuse located at rear of battery directly behind the socket
powering your fridge. If blown, replace with 15A 3AG fuse
b) Not fully charging in-car
i) Check connections – ensure they are secure and clean
ii) Is the WAECO RAPS12R-U Fast Charge Kit fitted? If not, the vehicle
wiring may not be heavy enough to deliver adequate charging
current. Fit RAPS12R-U to vehicle.
For further assistance call WAECO Technical (07) 55076040
9. Technical Information (RAPS 36):
Output sockets:
1 x 10A cigarette, 1 x 15A ‘hella’ style (fused separately)
Fuses:
2 x 15A 3AG
Input sockets:
1 x 2-pin screw type (small) for DC charging
1 x 2-pin screw type (large) for 72Ah connection
to second RAPS36 (not supplied – must be purchased
separately)
Voltage test:
Push button digital volts display
‘FULL’ LED (green) = 12.8V or more
‘LOW’ LED (red) = 11.3V or less
DC Charging Lead:
2.4m long, 2 pin screw connection battery end, cigarette
plug other end
Charge LED (green):
Adjacent to screw socket. On when battery connected to
in-car system and accepting 12V charge from vehicle
battery
AC Charging:
Max. charging current = 12A
Connection via + and – post terminals
Battery Cells:
2 x 12V 18Ah(20hr) deep cycle Absorbent Glass Mat (AGM)
Operating temp. range -20 to +60
o
C
Operation upside down acceptable
Weight:
13.6kg
Dimensions:
W230 x H245 x D227mm
CoolPower36_41102 30/10/04 11:55 AM Page 7
