Waeco PerfectView VS 400, Инструкция по установке и эксплуатации

Страница: 32 / 236

EN
Connecting electrical power to the video splitter VS400
32
7.2 Connecting the controller
➤ Connect this connection (fig.
6
1, page 5) to the controller.
➤
Connect this connection (fig. 6 2, page 5) to the monitor.
➤
Connect the cable set (fig. 5 3, page 4) to the plug of this connection
(fig. 6 3, page 5).
7.3 Connecting the cable set
The cable set features the following connections:
➤
Connect the camera connections (fig. 0 1, page 6) to the cameras.
➤
Connect the red cable (fig. 0 2, page 6) to the positive wire (+) of the
vehicle.
➤
Connect the black cable (fig. 0 3, page 6) to the earth wire (–) or to earth
(bodywork).
➤
Connect the green cable (fig. 0 4, page 6) to the positive wire (+) of the
reversing light (camera 1).
➤ Connect the white cable (fig.
0
5, page 6) to the control signal for
camera 2.
➤
Connect the blue cable (fig. 0 6, page 6) to the control signal for
camera 3.
➤
Connect the brown cable (fig. 0 7, page 6) to the control signal for
camera 4.
No. in
fig. 0 , page 6
Explanation
1 Connections for camera 1 – 4, 6-pin, protected from jets of
water
2 12 V conn, red
3 Earth connection –, black
4 Control input for reversing light (camera 1), green
5 Control input for camera 2, white
6 Control input for camera 3, blue
7 Control input for camera 4, brown