Waeco PerfectView CAM16, Инструкция по установке и эксплуатации

Страница: 23 / 140

PerfectView CAM16
Safety and installation instructions
23
Warning!
Insufficient supply line connections could result in short circuits which
– Cause cable fires
– Trigger the airbags
– Damage electronic control devices
– Cause electric functions to fail (indicators, brake light, horn, ignition, lights)
Please observe the following instructions:
z When working on the following lines, only use insulated cable lugs, plugs and tab
sleeves:
–
30 (direct supply from positive battery terminal)
– 15 (connected positive terminal, behind the battery)
– 31 (return line from the battery, earth)
– 58 (reversing light)
Do not use porcelain wire connectors.
z Use a crimping tool ( 1 11, page 3) to connect the cables.
For connections which are intended to be permanent, you can solder the cable ends
together and then insulate them.
z When connecting to supply line 31 (earth), screw the cable
–
To the vehicle's earth bolt with a cable lug and a gear disc or
– To the sheet metal body work with a cable lug and a self-tapping screw.
Ensure that there is a good earth connection.
When the negative terminal of the battery is disconnected, all data stored in the volatile
memory will be lost.
z The following data must be set again, depending on the vehicle equipment options:
–
Radio code
– Vehicle clock
– Timer
– On-board computer
– Seat position
You can find instructions for making these settings in the appropriate operating
instructions.
_RV-16.book Seite 23 Freitag, 13. April 2007 2:33 14