Operation
TC-series
9
➤
When you want to finish the cooling or heating process, press the button
„ON/OFF“ (see Illustration 2 A, Page 3).
➤
When you put the cooling box out of operation, disconnect the
connectingcable.
6.4
Select temperature
The status display of the temperature (see Illustration 2 F, Page 3) indicates
the selected temperature range. With an increasing number of illuminating
LEDs, the intensity of the temperature range also increases.
The following temperature indications are subject to tolerances
and are dependent on the measuring position.
Interior space-temperature at approx. 25 °C ambient temperature:
➤
If you want to select the temperature to
cool/heat
, press the button
“Temp“ (see Illustration 2 F, Page 3), until the requested temperature
range is reached.
6.5
Connect to the cigarette lighter
When you connect the cooling box to the cigarette lighter of your
vehicle (see illustration 3, page 3), observe that you have to turn
on the ignition, if necessary, so that the device is supplied with
current.
Status display
Temperature range
Cooling
seven illuminating
LEDs
approx 1 °C in the interior space
an illuminating LED
approx 15 °C in the interior space
Heating
seven illuminating
LEDs
approx 65 °C in the interior space
an illuminating LED
approx 50 °C in the interior space
TC-14_32.book Seite 18 Dienstag, 23. November 2004 3:46 15
