CoolPower EPS100
General safety instructions
15
z
Electronic devices are not toys
!
Keep electrical appliances out of reach from children or infirm
persons. Do not let them use the appliances without super-
vision.
2.2
Safety when installing the device
z
Ensure that the device is standing firmly!
The device must be set up and fastened in such a way that it
cannot tip over or fall down.
z
Do not expose the device to a heat source (such as direct sun-
light or heating). Avoid additional heating of the device in this
way.
For installation on boats
z
If electrical devices are incorrectly installed on boats, corrosion
damage might occur. Have the inverter installed by a specialist
(marine) electrician.
Electrical cables
z
If cables have to be fed through metal walls or other walls with
sharp edges, use ducts or tubes to prevent damage.
z
Do not lay cables which are loose or bent next to electrically
conductive material (metal).
z
Do not pull on the cables.
z
Do
not
lay the 230 V mains cable and the 12 V DC cable in the
same duct!
z
Fasten the cables securely.
z
Lay the cables so that they cannot be tripped over or damaged.
EPS-100W.book Seite 15 Donnerstag, 19. August 2010 1:21 13
