COOLMATIC CR Series
Installing and connecting the refrigerator
37
7
Installing and connecting the
refrigerator
7.1
Installing the refrigerator
The appliance is designed for ambient temperatures between –10 °C and
+43 °C. In continuous operation, the air humidity may not exceed 90 %.
Set up the fridge in a dry, sheltered place. Avoid placing it near heat sources
such as radiators, gas ovens, hot water pipes etc. Do not let it stand in direct,
strong sunlight.
Install the refrigerator so that the warm air produced can easily flow away
(either upwards or to the sides). Therefore make sure there is adequate
ventilation (fig.
7
, page 6).
If you put the refrigerator in a recess, you can fix it inside with suitable
screws:
➤
Remove the blanking plugs (fig.
6
2, page 5).
➤
Push the refrigerator into the recess.
➤
Use suitable screws (fig.
6
1, page 5) to fix the refrigerator in place.
➤
Press the blanking plugs (fig.
6
2, page 5) into the openings.
No. in
fig.
7
,
page 6
Explanation
1
Cold intake air
2
Hot waste air
3
Condenser
4
Spacing above the fridge if insufficient air can circulate above
or at the side.
_cr-kuehlschraenke.book Seite 37 Montag, 13. Februar 2006 3:46 15
