Installing and connecting the refrigerator
COOLMATIC CR Series
38
7.2
Undo the lock
The refrigerator has a locking mechanism (fig.
8
1, page 6) which is also
used, to protect it during transport. The following settings are possible:
z
Lock
(turn wheel clockwise to the end stop): The door is locked and
secured.
To open the door, lift the handle up and open it.
z
Vent
(turn wheel anti-clockwise to the end stop): The door is slightly open,
but fixed in position.
Use this position, if you are not going to use the appliance for a long time.
7.3
Changing the door hinge
You can also change the hinge of the door, so that it opens to the left rather
than the right.
➤
Proceed as shown in fig.
a
, page 8 to fig.
c
, page 8, to change the
hinges.
7.4
Connecting the refrigerator
Connect the refrigerator to DC power
The refrigerators
CR-50
,
CR-65
,
CR-80
and
CR-110
can be operated with
12 V or with 24 V DC.
Caution
To avoid voltage drops and loss of performance, keep the cable as
short as possible and avoid joins.
For this reason avoid additional switches, plugs or multi-way
adapters.
➤
Determine the required cross section of the cable in relation to the cable
length according to fig.
d
, page 9.
Key for fig.
d
, page 9
Caution
Make sure that the polarity is correct.
Co-ordinate axis
Explanation
Unit
l
Cable length
m
∅
Cable cross section
mm²
_cr-kuehlschraenke.book Seite 38 Montag, 13. Februar 2006 3:46 15
