EN
CFX95DZ2
Operation
17
7.5
Using the cooler
A
➤
Place the cooler on a firm foundation.
Make sure that the ventilation slots are not covered and that the heated
air can dissipate.
I
➤
Connect the cooler, see chapter “Connecting the cooler” on page 14.
A
➤
Press the “ON/OFF” button (fig.
3
1, page 9) for between one and two
seconds.
✓
The LED “
P
” lights up (fig.
3
2, page 9).
✓
The displays (fig.
3
6 and 7, page 9) switch on and show the current
temperatures.
✓
Depending on the compartment set temperatures, the cooler starts cool-
ing either one or both compartments.
✓
The LEDs (fig.
3
5 and 8, page 9) light up when the respective compart-
ment is cooling.
I
NOTICE! Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the
heat that generated during operation can dissipate. Ensure that
the ventilation slots are not covered. Make sure that the device
is sufficiently far away from walls and other objects so that the
air can circulate.
NOTE
Place the cooler as shown (fig.
1
, page 6). If you operate the box
in a different orientation it can be damaged.
NOTICE! Danger from excessively low temperature!
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
NOTE
When operating with the battery, the display switches off auto-
matically if the battery voltage is low. The LED “
P
” flashes orange.
