manualshive.com logo in svg

Waeco AirCon Service Center VAS 581 001A, Руководство по эксплуатации, Страница: 41 / 76

Поделиться
Скачать
Waeco AirCon Service Center VAS 581 001A Скачать руководство пользователя страница 41

41

VAS 581 001A

Operation

8.7

Free selection

I

The following four processes can be run in isolation from the 

“Free 

selection”

 menu:

Rec/Recycling phase: analyzing the refrigerant (see chapter “Analyz-
ing refrigerant” on page 25), extraction, recycling of the refrigerant, 
pressure rise test, draining the waste oil.

Vacuum phase: evacuating the system, leak test/vacuum check.

Filling phase: Before working on the vehicle air conditioner, a leak 
inspection must be carried out. The air conditioner is filled with a 
sample refrigerant for this. The pressure in the air conditioner must 
remain constant over a period of 5 minutes. The air conditioning unit 
can only be completely filled if this test has been successfully 
completed. The sample filling is then drained and the air conditioner 
evacuated. The final filling quantity is completely filled up to ensure 
high filling accuracy.
Filling with fresh oil, filling of UV additive, filling of refrigerant.

Select connections: Air conditioning has high and low pressure 
connection, only high pressure or only low pressure connection

After each process has been performed, a service report is printed.
1. Start by fitting the connections of the AirConServiceCenter to the 

vehicle air conditioning system, and opening them.

2. In the basic menu, use the cursor keys 

 or 

 to select 

“Free selection”

:

3. Press 

ENTER

 to confirm.

4. Enter the vehicle data and press 

ENTER

 to confirm.

NOTE 

The 

“Free selection”

 menu is used to conduct air conditioning servic-

ing step-by-step. You can perform the same processes as in the short 
selection menu, but also omit individual procedures. In addition, it is 
possible to enter the values for each individual process using the 
keypad. You can also enter the vehicle data for the service report in this 
menu.

Short selection
Free selection
Other selections
ENTER-OK

VAS-581-001A--O-US.book  Seite 41  Montag, 17. Februar 2020  8:25 20

Содержание AirCon Service Center VAS 581 001A













































































Отзывы:

Нет отзывов