12
13
Voltage
protection mode
The low voltage protection value is around 160V. If the voltage
of the power supply is lower, the device will automatically stop
working. The display will show the temperature indicators blinking.
When the voltage exceeds the 170V, the hair dryer will work again.
The high voltage protection value is around 260V. If the voltage
of the power supply is higher, the device will automatically stop
working. The display will show the temperature indicators blinking.
When the voltage is under 250V, the hair dryer will work again.
Except for the high and low voltage protection modes, the error
codes will disappear after three seconds. When the device is in
normal condition, it will automatically start working again.
In case of facing any other problem not mentioned above, please contact the after-sales department.
Error detection
PROBLEM
POSSIBLE ORIG IN
POSSIBLE SOLUTION
During the operation air sometimes comes
out and sometimes it does not.
The plug might be loosened. The air output might be
blocked by some hair or the hands themselves.
Properly plug the hair dryer. Do not block the air inlet.
The ON/OFF switch does not work.
ON/OFF switch fault. Internal component is damaged.
Contact the after-sales department.
The display does not work properly or
remains off.
Circuit board fault.
Contact the after-sales department.
The plug or the power cord are overheated.
The power cord is damaged.
Stop using the device immediately. Contact the after-
sales department.
Internal component is damaged.
Contact the after-sales department.
Air does not come out when the device is
on and the hair dryer is very hot.
Internal component is damaged.
Contact the after-sales department.
External object that blocks the air inlet.
Make sure that the air inlet is not blocked and use the
hair dryer once it is cool again.
Noise and vibration.
Internal component is damaged.
Contact the after-sales department.
Product deformation.
Internal component is damaged.
Contact the after-sales department.
Burnt-smelling during its use (except for
the first time).
Internal component is damaged.
Contact the after-sales department.