WACOM Co., Ltd.
4
“
Cet appareil numérique de la classe (B) est conforme à la norme NMB-
003 du Canada.”
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the
device.
RF exposure compliance
1) To comply with FCC/IC RF exposure compliance requirements, a separation distance of at least 20 cm
must be maintained between the antenna of this device and all persons.
2) This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
4. Operation
Connecting the tablet
The STU-520A can be connected to a host computer via a USB cable. Consult your Wacom Signature
Solution Partner for the STU-520A and host computer connection.
Software / Driver
Wacom does not provide any driver or application software for the STU-520A. Any application needed to
connect and run the STU-520A as a signature capturing device must be delivered by a third party.
5. Note on using this product
Replacing the pen tip
For replacement of the pen tips please contact your Wacom Signature Solution Partner. The spare part
number for the pen nibs is PSI-A007.
Note on use
When LCD panel is operated continuously for long period, a trace of electric charge remains near the
electrode inside the LCD, and residual or “ghost” image of the previous image may be observed (Image
persistence).
To avoid image persistence, Wacom recommends the use of a moving screen saver when the screen is
turned on but idle.
Caring for your LCD signature tablet
Keep the pen and LCD screen surface clean. Dust and dirt particles can stick to the pen and cause wear to
the display screen surface. Regular cleaning will help prolong the life of your LCD screen surface and pen.
Keep the tablet and pen in a clean, dry place and avoid extremes in temperature. Room temperature is best.
The STU-520A and pen are not made to come apart. Taking apart the product will void your warranty.
