WACO VC3504, Руководство пользователя

Страница: 14 / 81

14
** WiFi is an optional function.
When the appliance is linked to a phone, the WiFi symbol will light on. Refer to the WiFi
manual for instructions on how to link the appliance to a phone.
*** The ionizer is an optional function.
If the appliance does not have a pump function, the "Ionizer symbol" and "Ionizer
button" will be empty.
Insert the plug in the socket. The appliance will enter standby mode. The screen will display
the following figure:
●
"POWER" button
On/off power supply, used to control the power status of the appliance.
●
Decrease/Increase button
Press " " / " " to configure the indoor humidity or time.
The adjustable humidity range is 35% RH-80% RH. The screen will display the configured
humidity. After a few seconds, it will switch to displaying the ambient humidity.
When the ambient humidity is lower than the configured humidity, the compressor will
stop running. After a few minutes, the fan will stop running.
Press the " " button until " " displays on the screen. The "Continuous" symbol
will light up. The appliance will continuously run.
●
Fan speed button
Press the "FAN SPEED" button to select the fan speed: high or low. The corresponding
symbol will light up.
●
Ionizer function * (some appliances only)
Hold the "FAN SPEED" button for 3 seconds to start or stop the ionizer function.