Wacker Neuson WP 1550 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 38

Wacker Neuson WP 1550 Скачать руководство пользователя страница 8

Safety Information

WP 1550

wpm_si000324gb.fm

6

1.2

Operating Safety

Familiarity and proper training are required for the safe operation of the
machine. Machines operated improperly or by untrained personnel
can be hazardous. Read the operating instructions contained in this
manual and the engine manual, and familiarize yourself with the
location and proper use of all controls. Inexperienced operators should
receive instruction from someone familiar with the machine before
being allowed to operate it.

1.2.1

Do not allow anyone to operate this equipment without proper training.
People operating this equipment must be familiar with the risks and
hazards associated with it.

1.2.2

Do not touch the engine or muffler while the engine is on or
immediately after it has been turned off. These areas get hot and may
cause burns.

1.2.3

Do not use accessories or attachments that are not recommended by
Wacker Neuson. Damage to equipment and injury to the user may
result.

1.2.4

NEVER operate the machine with the beltguard missing. Exposed
drive belt and pulleys create potentially dangerous hazards that can
cause serious injuries.

1.2.5

NEVER leave the machine running unattended.

1.2.6

Be sure operator is familiar with proper safety precautions and
operation techniques before using machine.

1.2.7

ALWAYS wear protective clothing appropriate to the job site when
operating the machine.

1.2.8

Wear hearing protection when operating equipment.

1.2.9

Close fuel valve on engines equipped with one when machine is not
being operated.

1.2.10

Store the machine properly when it is not being used. The machine
should be stored in a clean, dry location out of the reach of children.

1.2.11 Always operate machine with all safety devices and guards in place

and in working order. Do not modify or defeat safety devices. Do not
operate machine if any safety devices or guards are missing or
inoperative.

1.2.12

Read, understand, and follow procedures in the Operator’s Manual
before attempting to operate the machine.

«
...
6
7
8
9
10
...
»

Содержание WP 1550







































Отзывы:

Нет отзывов