manualshive.com logo in svg

Wacker Neuson WM 650, Руководство оператора

Поделиться
Скачать
Wacker Neuson WM 650 Скачать руководство пользователя страница 26

WM 650 / WM 720

Maintenance

wc_tx000656gb.fm

26

5.5

Air Cleaner

See Graphic: wc_gr003002

NEVER use gasoline or other types of low flash-point solvents for
cleaning the air cleaner. A fire or explosion could result.

NOTICE:

 NEVER run the engine without the air cleaner. Severe

engine damage will occur.

The engine is equipped with a dual-element air cleaner. Under normal
operating conditions, elements should be cleaned once every week.
Under severe, dry and dusty conditions, the elements should be
maintained daily. Replace an element when it is saturated with dirt that
cannot be removed. 

5.5.1

Remove the wing bolt 

(a)

 and cover 

(b)

.

5.5.2

To clean the paper element 

(c),

 tap it lightly on a flat surface. Replace

the paper element if it is damaged or heavily soiled.

5.5.3

To clean the foam element 

(d)

, wash it in liquid detergent and water.

Squeeze it dry in a clean cloth. Once dry, saturate the foam element in
engine oil, then squeeze out excess. Replace the foam element if it is
damaged or heavily soiled. Re-install the foam element and re-
assemble the air cleaner.

WARNING

wc_gr003002

d

c

a

b

Содержание WM 650































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды