Wacker Neuson VPH70 Скачать руководство пользователя

Страница: 30 / 32

VPH70

Maintenance

wpm_tx001813gb.fm

5.13 Troubleshooting

Problem / Symptom

Reason / Remedy

Plate does not develop full

speed. Poor compaction.

• Engine throttle control not completely open.
• Throttle control not adjusted correctly.
• Ground too wet, plate sticking. Allow soil to dry

before compacting.

• Drive belt loose or worn, slipping on pulleys. Adjust

or replace belt. Check that engine mounting bolts
are tight.

• Exciter bearings binding. Check condition and level

of oil in exciter. Add or change oil.

• Air filter clogged with dust, reducing engine perfor-

mance. Clean or replace air filter.

• Engine speed too low. Check engine speed with

tachometer. Adjust or repair engine to run at correct
speed. Refer to engine manual.

Engine running, no vibration

• Engine throttle not open.
• Drive belt loose or broken. Adjust or replace.
• Clutch damaged. Inspect and replace clutch.
• Engine speed too low. Check engine speed.
• Too much oil in exciter. Adjust oil to correct level.

Plate jumps or compacts

unevenly.

• Ground surface too hard.
• Shockmounts loose or damaged.

Содержание VPH70

































Результаты поиска

Содержание VPH70

Отзывы:

Похожие инструкции для VPH70

Бренды по названию

Популярные бренды

Wacker Neuson VPH70, Руководство оператора

Результаты поиска

Содержание VPH70

Отзывы:

Похожие инструкции для VPH70

Бренды по названию

Популярные бренды