Wacker Neuson RCP 20, Руководство оператора

Страница: 11 / 62

RCP Safety information
11
Checking for signs of damage
Inspect the machine when it is switched off for any signs of damage at least once
per work shift.
Do not start the machine if there is visible damage or defects.
Have any damage or defects eliminated immediately.
3.2 Qualification of the operating personnel
Operator qualifications
Only trained personnel are permitted to start and operate the machine. The fol-
lowing rules also apply:
„
You are physically and mentally fit.
„
You have received instruction on how to independently use the machine.
„
You have received instruction in the proper use of the machine.
„
You are familiar with required safety devices.
„
You are authorized to start machines and systems in accordance with the
standards governing safety.
„
You have been assigned to work on the machine by your company.
Incorrect operation
Incorrect operation or misuse by untrained personnel can endanger the health
and safety of the operator and also cause machine and material damage.
Operating company responsibilities
The operating company must make the operator's manual available to the oper-
ator and ensure that the operator has read and understood it.
Work recommendations
Please observe the recommendations below:
„
Work only if you are in a good physical condition.
„
Work attentively, particularly as you finish.
„
Do not operate the machine when you are tired.
„
Carry out all work calmly, circumspectly and carefully.
„
Never operate the machine under the influence of alcohol, drugs or medica-
tion. This can impair your vision, reactions and your judgment.
„
Work in a manner that does not endanger others.