Wacker Neuson RC50, Инструкция по эксплуатации

Страница: 170 / 222

Tables
Technical data
170 BA RC50_RC70 en 00
5.01 Technical data
N O T E
The version valid at the time the technical data was prepared
for this version of the manual was used (see impressum:
change date). Other values may apply if modifications are
made to the machine in the course of its further development.
5.01.01 RC50
Designation Value Unit
Dimensions and weights
Basic weight without cab 4580 kg
Cab operating weight 5035 kg
Front/rear axle load 2625/2410 kg
Working width 1370 mm
Inside/outside turning radius 3375/4745 mm
Diesel engine
Manufacturer Kubota
Type V3307-CR-T
Number of cylinders 4
Power (ISO 14396)/rated speed 55.4/2200 kW/rpm
Exhaust emissions category EU/USA V/Tier 4
Carbon dioxide emissions (CO
2
)
(1)
807.2 g/kWh
Travel drive
Working gear speed 0–6.0/(0–3.7) km/h / (mph)
Transport speed 0–12.5/(0–7.7) km/h / (mph)
Gradeability with/without vibration 55/60 %
Max. permitted longitudinal incline 20 °
Max. permitted transverse incline 20 °
Tyres
Number of tyres 2 units
Tyre diameter, min./max. 1040/1160 mm
Rolling circumference, min./max. 3040/3420 mm
Tyre size 12.4-24-R1 8 PR
■
Air pressure
■
Total weight per tyre
0.15/(1.5)/[21.75]
85
MPa/(bar)/[psi]
kg
Tyre size 12.4-24-R3 8 PR
■
Air pressure
■
Total weight per tyre
0.22/(2.2)/[32.0]
85
MPa/(bar)/[psi]
kg
Tightening torque, wheel nut 450 Nm
Vibration
Vibration front
Frequency/speed 30/1800 Hz/rpm