Wacker Neuson PST2-400 Скачать руководство пользователя страница 8

Safety Information

PST2/PSTF2 400

wc_si000034gb.fm

8

1.1

Operating and Electrical Safety

To reduce risk of electric shock, connect only to a properly grounded,
grounding-type receptacle.

Risk of electric shock—this pump has not been investigated for use in
swimming pool areas.

An acceptable motor-control switch shall be provided at the time of
installation according to local codes and regulations.

To reduce risk of electric shock, follow instructions in this manual for
proper installation.

CAUTION:

 This pump may automatically restart. Prior to working on

the pump or control panel, all supply circuits must be disconnected.

CAUTION: 

Risk of shock—do not remove cord and strain relief.

1.2

Informational Labels

Label

Meaning

A nameplate listing the model number, item num-
ber, revision number, and serial number is 
attached to each unit. Please record the informa-
tion found on this plate so it will be available 
should the nameplate become lost or damaged. 
When ordering parts or requesting service infor-
mation, you will always be asked to specify the 
model number, item number, revision number, 
and serial number of the unit.

WARNING

Wacker Neuson Corporation

Menomonee Falls, WI 53051 USA

Model

Item No.

Rev.

Serial No.

V

Hz

kW

kg

Max. 

L/min

Max. m

MADE IN

 

TAIWAN

HP

lbs

Max. GPM

Max. ft

C

US

L I STED

R

Phase

C22.2 No. 108-M89

2001993

Conforms to  UL Std. 778

Cert. to CAN/CSA  St d.

Amp.

Man. Y/M

THERMALLY PROTECTED
INDOORS OR  OUTDOORS

CSA ENCLOSURE 3

Содержание PST2-400

















































Отзывы: