Wacker Neuson PS3 1500, Руководство оператора, Страница: 18 / 52

Installation PS3 1500 / PS3 2200
18
wc_tx001974gb.fm
3.7 Changing the Operating Voltage
The operating voltage of the motor can be changed from 110V to
220V depending on the available power source.
Requirements
• Pump disconnected from the power source
• Hand tools (screwdriver and wrench)
Procedure
Follow the procedure below to change the operating voltage of the
motor.
3.7.1 Remove the four bolts (c) , lockwashers (d) , and flat washers (e) that
fasten the housing cover (j) to the motor bracket.
3.7.2 Carefully lift the housing cover.
NOTICE: Avoid entangling the power cord lead wires with internal compo-
nents such as the centifugal switch (p) or the capacitor (o) . Be careful not to
damage the O-ring (w) while lifting the housing cover.
3.7.3 Support the housing cover so that it allows access to the terminal box
(q) .
WARNING
Electric shock hazard.
f
Ensure that the pump is disconnected from the power source before changing
the operating voltage.
wc_gr008856
p