Wacker Neuson GPS 9700, Руководство оператора

Страница: 24 / 44

Operation GPS 8500 / GPS 9700
24
2.12 Engine Auto Idle
The auto idle switch
(a)
automatically reduces engine speed 5 seconds
after all appliances or tools attached to the generator have been turned
off. Engine automatically returns to full speed when a tool or appliance
is turned back on.
To turn auto idle feature on, push auto idle switch to ON
(I)
. This
position is recommended while the generator is running to minimize
fuel consumption. To avoid extended engine warm-up periods, keep
switch OFF
(O)
when starting the engine and until engine reaches
operating temperature.
2.13 Engine Speed
Generators require a fixed engine speed to maintain the correct
voltage. Engine speed is controlled by a governor which automatically
adjusts to varying loads on the engine to maintain a constant speed of
3600 rpm. There is no throttle control. Use the Auto Idle switch on the
generator to control engine speed.
Note: The battery must have the appropriate charge (nine volts
minimum) for the generator governor to perform properly. If the
generator starts but will not run at speed, check battery charge.
IDLE
a2
a1