manualshive.com logo in svg

Wacker Neuson G 43, Руководство оператора

Поделиться
Скачать
Wacker Neuson G 43 Скачать руководство пользователя страница 7

50Hz Mobile Generators

Safety Information

wc_si000271gb.fm

7

1

Safety Information

1.1

Signal Words Found in this Manual

NOTICE:  

Used without the safety alert symbol, NOTICE indicates a situation 

which, if not avoided, could result in property damage.

Note: 

Contains additional information important to a procedure.

This is the safety alert symbol. It is used to alert you to potential personal hazards.

f

Obey all safety messages that follow this symbol.

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in death 

or serious injury.

f

Obey all safety messages that follow this symbol to avoid injury or death.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result in 

death or serious injury.

f

Obey all safety messages that follow this symbol to avoid possible injury or 
death.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, could result in 

minor or moderate injury.

f

Obey all safety messages that follow this symbol to avoid possible minor or 
moderate injury.

Содержание G 43


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды