Wacker Neuson ET18 Скачать руководство пользователя страница 51

Страница: 51 / 298

OM ET18/20/24 us 1.3 * et18_20_24i400.fm

4-1

Putting into operation

4.1

Cab/control stand

Safety instructions regarding entry and exit

CAUTION

Accident hazard when entering or exiting!

Entering or exiting incorrectly can cause injuries.

►

Keep the mandatory climbing aids clean.

►

Use the mandatory climbing aids

for entering and exiting.

►

Face the machine as you enter and leave it.

►

Have damaged climbing aids replaced.

Entry and exit (canopy)

Stop the machine (see chapter “Operation, stopping the machine”).

If the machine is equipped with a canopy, it can be accessed from either
side.

Information

Entry and exit via the tracks is only possible if the travel gear is
telescopically extended (telescopic travel gear only for ET18 and
ET20).

Cab entry and exit

Stop the machine (see chapter “Operation, stopping the machine”).

Information

When entering or leaving the cab on the left-hand side, the door
must be locked in the arrester.

Information

Entry and exit via the tracks is only possible if the travel gear is
telescopically extended (telescopic travel gear only for ET18 and
ET20).

Fig. 50:

Entry and exit (canopy)

Fig. 51:

Entry and exit on left-hand side of cab

Putting into operation

Содержание ET18











































































































































































































































































































Результаты поиска

Содержание ET18

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson ET18, Руководство оператора

Результаты поиска

Содержание ET18

Отзывы:

Бренды по названию

Популярные бренды