manualshive.com logo in svg

Wacker Neuson ET16, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET16 Скачать руководство пользователя страница 110

5-8

BA ET16 de*   1.0 *  et16b500.fm

 

5 Operation

Parking the machine

WARNING

Crushing hazard due to machine rolling away under its own weight 
after parking it!

Serious injury or death can be caused by not securing the machine.

►

Lower the boom and the stabilizer blade to the ground.

►

Secure the machine accordingly (for example with chocks).

1. Park the vehicle on firm, level, and horizontal ground.
2. Position the boom straight ahead at the center of the machine.
3. Lower the boom and the stabilizer blade to the ground.
4. Stop the engine.
5. Operate the control lever repeatedly to release the pressure in the 

hydraulic system.

6. Remove the starting key and carry it with you.
7. Raise the control lever base.
8. Close and lock all covers.
9. Secure the tracks accordingly (for example with chocks, blocks) as 

shown in 

Fig. 111

.

Information

In order to prevent the formation of condensation water, fill up the fuel tank 
nearly completely at the end of each working day.

Parking the machine on slopes

If parking the machine on a slope cannot be avoided, observe the 
following in addition:
• Position the boom on the downhill side of the machine and firmly press 

the attachment into the ground.

• Place stabilizer blade on the downhill side.
• Press the stabilizer blade against the ground.
• Secure the machine with wheel chocks (see 

Fig. 112

).

5.5

Differential lock

Not available.

Fig. 111

Fig. 112

Содержание ET16

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды