Wacker Neuson BS 70-2 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 50

Wacker Neuson BS 70-2 Скачать руководство пользователя страница 11

BS 60-2 / BS 70-2

Safety Information

wc_si000474gb.fm

11

1.3

Safety Guidelines for Operating the Machine

Familiarity and proper training are required for the safe operation of the
machine. Machines operated improperly or by untrained personnel
can be hazardous. Read the operating instructions contained in this
manual and the engine manual, and familiarize yourself with the
location and proper use of all controls. Inexperienced operators should
receive instruction from someone familiar with the machine before
being allowed to operate it.

Operator qualifications

Only trained personnel are permitted to start, operate, and shut down
the machine. They also must meet the following qualifications:

•

have received instruction on how to properly use the machine

•

are familiar with required safety devices

The machine must not be accessed or operated by:

•

children

•

people impaired by alcohol or drugs

Personal Protective Equipment (PPE)

Wear the following Personal Protective Equipment (PPE) while
operating this machine:

•

Close-fitting work clothes that do not hinder movement

•

Safety glasses with side shields

•

Hearing protection

•

Safety-toed footwear

1.3.1

Never operate this machine in applications for which it is not intended.

1.3.2

Do not allow anyone to operate this equipment without proper training.
People operating this equipment must be familiar with the risks and
hazards associated with it.

1.3.3

Do not touch the engine or muffler while the engine is on or
immediately after it has been turned off. These areas get hot and may
cause burns.

1.3.4

Do not operate the machine with unapproved accessories or
attachments.

1.3.5

Never leave the machine running unattended.

1.3.6

Never tamper with or disable the function of operating controls.

1.3.7

Never use the choke to stop the engine.

1.3.8

Never operate the machine in areas where explosions may occur.

1.3.9

Read, understand, and follow procedures in the Operator’s Manual
before attempting to operate the machine.

WARNING

«
...
9
10
11
12
13
...
»

Содержание BS 70-2



















































Отзывы:

Нет отзывов