Wacker Neuson BH55, Руководство оператора

Страница: 11 / 54

3 Safety
11
100_0302_si_0001.fm
3.12 Transport
Switching off the machine
Before you transport the machine, it must be switched off, and the engine must be given sufficient time
to cool down.
Emptying the tank
Wacker Neuson recommends that the fuel tank be emptied and the carburetor run dry prior to
transporting it. Fuel could run out, e.g. if the machine is tilted.
Observe the national safety guidelines and the hazardous materials regulations that apply to the
respective means of transportation.
Transporting the machine
Secure the machine on the transport device against tilting, falling or slipping.
Lifting the machine
A falling machine can cause serious injuries.
The machine has no lifting or lashing points.
When lifting the machine, secure it in a closed transport container or similar in order to prevent it from
toppling, falling or slipping away.
Restarting
Machines, machine parts, accessories or tools that were detached for transport purposes must be re-
mounted and fastened before restarting.
Only operate in accordance with the operating instructions.
3.13 Operating safety
3.13.1 Explosible environment
Never operate the machine in a potentially explosive environment.
3.13.2 Work environment
Familiarize yourself with your work environment before you start work. This includes e.g. the following
items:

Obstacles in the work and traffic area.

Load-carrying capacity of the ground.

The measures needed to cordon off the construction site from public traffic in particular.

The measures needed to secure walls and ceilings.

Options available in the event of an accident.
3.13.3 Safety in the work area
When working with the machine especially pay attention to the following points:

Electric lines or pipes in work area.

Gas lines or water lines in the work area.

Material becoming separated, dropping down or ejected. Make sure that you do not put other persons
in danger.

Pay maximum attention in the vicinity of drops or slopes. Risk of falling.

Maintain a sufficient distance from flammable materials.
3.13.4 Checks before starting work
Check the following points before beginning work:

Condition of tools.

Machine settings.
3.13.5 Starting the machine
Observe the safety information and warning notices located on the machine and in the operator's
manual.
Never attempt to start a machine that requires maintenance or repairs.
Start the machine as described in the operator's manual.