Wacker Neuson 901S, Руководство оператора

Страница: 64 / 180

3-18
BA 901/1101 en – Edition 2.1 * 91101b320.fm
Operation
Starting with the immobilizer (option)
After you have completed the starting preparations:
☞
Approach the transponder key to about 2 cm from the emitter/receiver unit A
☞
The machine can be started as soon as the red indicator light B goes out
☞
Insert the starting key in the preheating start switch within 30 seconds and
☞
Turn the starting key at least to position “ 1 ”
☞
Check whether all indicator lights illuminate:
☞
Replace malfunctioning indicator lights immediately.
☞
Turn the starting key to position “ 2 ” and hold it in this position for about 5 seconds
➥
The intake air is preheated
☞
Turn the starting key to position “ 3 ” and hold it in this position until the engine starts
➥
If the engine does not start after 10 seconds
☞
Interrupt the start procedure and try again after about 1 minute
➥
If the engine still does not start after the second try
☞
Contact a Wacker Neuson service center for troubleshooting
➥
As soon as the engine runs:
☞
Release the starting key
Fig. 50: Immobilizer
Fig. 50: Preheating start switch
Fig. 50:
Fig. 51:
Fig. 52:
Fig. 53: Indicator lights
1
0
2
3
A
B
!