manualshive.com logo in svg

Wacker Neuson 803 Dualpower, Руководство по обслуживанию

Поделиться
Скачать
Wacker Neuson 803 Dualpower Скачать руководство пользователя страница 12

1-4

SHB 803 en – Edition 2.4 * 803s110.fm

 

Operation

1.3 Designated use and exemption from liability

• The machine is intended for:

• Moving earth, gravel or rubble, and for hammer operation
• See chapter 1.5 “Fields of application, attachments” in the Operator’s Manual for 

more information on the use of attachments.

• Every other application is regarded as not designated for the use of the machine. 

Wacker Neuson will not be liable for damage resulting from use other than mentioned 
above. The user alone will bear the risk.

• Designated use also includes observing the instructions set forth in the Operator’s 

Manual and observing the maintenance and service conditions.

• The safety of the machine can be negatively affected by performing machine modifica-

tions without proper authority and by using spare parts, equipment, attachments and 
optional equipment that have not been checked and released by Wacker Neuson. 
Wacker Neuson will not be liable for damage resulting from this.

• Wacker Neuson Linz GmbH shall not be liable for personal injury and/or damage to 

property caused by failure to observe the safety instructions and the Operator’s 
Manual, and by the negligence of the duty to exercise due care when:
• handling
• operating
• servicing and performing maintenance and
• repairing the machine. This is also applicable in those cases in which special 

attention has not been drawn to the duty to exercise due care, in the safety instruc-
tions, the Operator’s Manuals and maintenance manuals (machine/engine).

• Read and understand the Operator’s Manual before starting up, servicing or repairing 

the machine. Observe all safety instructions!

• The machine may not be used for transport jobs on public roads!
• Hammer operation is only allowed in specified areas.

Содержание 803 Dualpower





































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды