Wacker Neuson 803 Dualpower Скачать руководство пользователя страница 80

Страница: 80 / 228

3-26

OM 803 us – Edition 3.7 * * 803b330.fm

Operation

Parking the machine

Warning!

WARNING
Accident hazard due to incorrect parking!

Can cause serious injury or death.

•

Park the machine on level ground

•

Press the boom and the stabilizer blade against the ground

•

Secure the tracks accordingly (chocks, for example)

☞

Stop the machine.

☞

Press the boom and the stabilizer blade against the ground.

☞

Reduce engine speed completely.

NOTICE

Never stop the engine under full load, otherwise it can be damaged due to
overheating. Except in case of an emergency, always ensure that the engine
can cool down before it is stopped.

•

Let the engine run at idling speed with no load for at least 5 minutes before
you switch it off.

☞

Secure the machine against unauthorized operation.

☞

Raise the lock lever.

☞

Remove the starting key and carry it with you.

Parking the machine on slopes

☞

Avoid stopping the machine abruptly. Always ensure that there is enough space for
stopping the machine.

• Park the machine on firm, level and horizontal ground. Never park on slopes. If you

cannot avoid parking the machine on a slope:

☞

Press the bucket

onto

the ground on the downhill side of the machine.

☞

Place the stabilizer blade downhill and press it against the ground.

☞

Place chocks under the tracks to prevent the machine from moving.

Warning!

WARNING
Accident hazard due to control lever operation!

Can cause serious injury or death.

•

Raise the lock lever before leaving the seat.

Fig. 75: Parking the machine on slopes

Содержание 803 Dualpower





































































































































































































































Результаты поиска

Содержание 803 Dualpower

Отзывы:

Похожие инструкции для 803 Dualpower

Бренды по названию

Популярные бренды

Wacker Neuson 803 Dualpower, Руководство оператора

Результаты поиска

Содержание 803 Dualpower

Отзывы:

Похожие инструкции для 803 Dualpower

Бренды по названию

Популярные бренды