4 9
MAINTENANCE
HYDRAULIC SYSTEM
The oil tank is situated in the rear central part of the
machine, with the filling cap
“D”
positioned in the
rear left side and accessible with the cabin raised.
The visual level indicator
“A”
is situated on the
tank’s left lateral wall. This is used to control the
level of liquid container. For the capacity and filling
up follow the chapter “REFILLING”.
- The oil level is checked with the machine stand-
ing level and with the cylinder rods at their maxi-
mum extension. In these conditions the oil level
should not be below the minimum mark.
- The engine must be off.
- The oil must be at operating temperature (around
60ºC).
- For top-ups unscrew the cap and use a funnel in
order to introduce the oil, and this should be car-
ried out very slowly.
- The capacity of the tank alone at max. level
is 30 litres.
EXAUST FILTER REPLACING:
- Positioned on the right internal side of the frame and accessible with the cabin raised.
- Replace the filter cartridge
“FS”
with another cartridge having the same features. The filter must
be replaced for the first time after 100 hours of working. For successive replacements refer to
the MAINTENANCE TABLE.
FS
