Wacker Neuson 1000164553, Руководство оператора

Страница: 55 / 188

BA 1404 en – Edition 2.7 * 1404b330.fm
3-13
Operation
Before starting the engine
☞
Adjust seat position and rearview mirror – see Seat adjustment on page 3-33
Notice!
All controls must be within easy reach. You must be able to move the drive levers
to their limit positions!
Notice!
Operate the machine only on appropriately ventilated premises! Ensure suffi-
cient ventilation on enclosed premises!
☞
Fasten your seat belt – see Seat belt on page 3-34
☞
Check whether all levers and pedals are in neutral position
☞
Move the throttle to the center position (between minimum and maximum) if the engine is cold
Starting the engine: general • The starter cannot be actuated if the engine is already running (start repeat interlock)
• Do not run the starter for more than 10 seconds
• Wait about 1 minute so the battery can recover before trying again
Procedure
Caution!
Actuating the preheating system too long can damage the preheater.
☞
Never preheat the engine more than 20 seconds
After you have completed the starting preparations:
☞
Insert the starting key in the preheating start switch
☞
Turn the starting key to position “ 1 ”
☞
Check whether all indicator lights illuminate:
☞
Replace malfunctioning indicator lights immediately.
☞
Turn the starting key to position “ 2 ” and hold it in this position for about 5 seconds
➥
The intake air is preheated
☞
Turn the starting key to position “ 3 ” and hold it in this position until the engine starts
➥
If the engine does not start after 10 seconds
☞
Interrupt the start procedure and try again after about 1 minute
➥
If the engine still does not start after the second try
☞
Contact a Wacker Neuson workshop for troubleshooting.
➥
As soon as the engine runs:
☞
Release the starting key
1
0
2
3
Abb. 46: Preheating start switch
Abb. 47: Indicator lights
Operation