WACKER Group 0007659 Скачать руководство пользователя страница 32

Страница: 32 / 60

Maintenance

PG Pumps

wc_tx000607gb.fm

4.8

Engine Oil—Machines with Honda Engines

See Graphic: wc_gr000022

4.8.1

Drain the oil while the engine is still warm.

4.8.2

Remove the oil filler plug

(a)

and the drain plug

(b)

to drain the oil.

Note:

In the interests of environmental protection, place a plastic sheet

and a container under the machine to collect any liquid that drains off.
Dispose of this liquid in accordance with environmental protection
legislation.

4.8.3

Install the drain plug.

4.8.4

Fill the engine crankcase with the recommended oil up to the level of
the plug opening

(c)

. See

Technical Data for oil quantity and type.

4.8.5

Install the oil filler plug.

4.9

Cleaning Sediment Cup—Machines with Honda Engines

See Graphic: wc_gr000029

4.9.1

Turn the fuel valve off.

4.9.2

Remove the sediment cup

(a)

and the O-ring

(b)

4.9.3

Wash both thoroughly in a nonflammable solvent. Dry and reinstall
them.

4.9.4

Turn the fuel valve on and check for leaks.

Содержание 0007659





























































Результаты поиска

Содержание 0007659

Отзывы:

Похожие инструкции для 0007659

Бренды по названию

Популярные бренды

WACKER Group 0007659, Руководство по ремонту

Результаты поиска

Содержание 0007659

Отзывы:

Похожие инструкции для 0007659

Бренды по названию

Популярные бренды