Wachs HPU-20, Руководство пользователя

Страница: 18 / 30

HPU-20 Hydraulic Power Unit
14 Part No. 14-MAN-35, Rev. 0-0616 E.H. Wachs
S
ET
-U
P
I
NSTRUCTIONS
The HPU-20 power unit is completely assembled before
delivery. For safe shipping, it is delivered without hydraulic
fluid.
Fill the Hydraulic Reservoir
NOTE: It is extremely import-
ant that the pump is not
started until oil is in the sys-
tem. Power units are shipped
without oil. Operating a pump
without oil, even for a short
time, will result in damage.
Fill the hydraulic reservoir with hydraulic oil. The HPU-20
holds approximately 30 gallons (114 l). Make sure you fill
the reservoir before starting the power unit.
Use an ISO-AW32 (preferred) or ISO-AW46 oil. Oil should
have anti-wear characteristics, excellent rust protection, and
contain additives to protect against foaming.
Figure 3-2. Remove the hydraulic reservoir cap and
fill the reservoir with hydraulic oil (approximate
capacity 30 gallons [114 l]).
Hydraulic reservoir cap