WDG053XIOM _01c_oi_e / Aug-19
Seite 32 / 48
5.8.
Command Menu
INPUT 1 ACTION
(function Input 1)
This parameter defines the function of the input “Ctrl. In 1”.
0
NO
No function
1
RESET/SET VALUE
Transfer of the currently acquired position value (after bit
suppression and possibly performed encoder zero offset) in the
parameter "SSI Offset" (display zero offset)
(d) (s)
2
FREEZE
Freeze actual display value
(s)
3
KEY LOCK
disable touch screen
(s)
4
LOCK RELEASE
Loosen locking of all outputs
(d)
5
RESET MIN/MAX
Reset of the min. / max. values
(d) (s)
6
SERIAL PRINT
Sending of serial data, see parameter SERIAL VALUE
(d)
7
TEACH PRESEL. 1
Current display value is stored as PRESELECTION 1
(d)
8
TEACH PRESEL. 2
Current display value is stored as PRESELECTION 2
(d)
9
TEACH PRESEL. 3
Current display value is stored as PRESELECTION 3
(d)
10 TEACH PRESEL. 4
Current display value is stored as PRESELECTION 4
(d)
11 SCROLL DISPLAY
Display switching (see display in operation mode)
(d)
12 CLEAR LOOP TIME
Release all latched switching conditions
13 START PRESELECT
N.A.
14 ACTIVATE DATA
N.A.
15 STORE DATA
N.A.
16 TESTPROGRAM
N.A.
17 SET RED COLOR
The display lights up red. The color can be changed by the
event-dependent color switching in the PRESELECTION 1... 4
(d)
18 SET GREEN COLOR
The display lights up green. The color can be changed by the
event-dependent color switching in the PRESELECTION 1... 4
(d)
19
SET YELLOW
COLOR
The display lights up yellow The color can be changed by the
event-dependent color switching in the PRESELECTION 1... 4
(d)
20 ZERO POSITION
Transfer of the current SSI position in the parameter "SSI Zero"
(encoder zero offset)
(d) (s)
21 INC. BRIGHTNESS
Display brightness is increased
(d) (s)
22 DEC. BRIGHTNESS
Display brightness is reduced
(d) (s)
(s) = static switching (level evaluation)
INPUT CONFIG must be set to active LOW / HIGH
(d) = dynamic switching (edge evaluation)
INPUT CONFIG must be set to RISING/FALLING EDGE
